Pathway Control Valves
Click Image for PDF
304 Series: Three Way, Two Position, Low Pressure Valves
|
550 Series: Back Pressure, Low Pressure Valves
|
Low pressure valve for diverting, blending and metering
Working Pressure – 600 psig in 2”, 300 psig in 3” and 4”
Ductile iron body; variety of trim and internal materials
Soft trim for bubble tight shut-off
Readily fitted for Electric/Hydraulic actuator
Ideal for metering skids, test manifolds and other diverting operations
|
Maintains upstream pressure within a preset range
Working Pressure – 100 to 350 psig in 2”; 90 to 300 psig in 3”; 50 to 200 psig in 4”
Self contained back pressure operation or use Pathway R2800 pressure pilot
Ductile iron body; variety of trim and internal materials
Soft trim for bubble tight shut-off
Excellent for separator back pressure relief or a custody transfer dump valve
|
500 Series: Two Way, Low Pressure Valves
|
8100 Series: Two Way, High Pressure Valves
|
On-off or modulating control on low pressure applications
Working Pressure – 600 psig in 1”, 2” and 3”; 300 psig in 4”
Ductile iron body; variety of trim and internal materials
Excellent low pressure dump valve for oil & gas separators, heaters/treaters or other liquid accumulators
|
On-off or Throttling Control on high pressure applications
Working Pressure – 6000 psig in 1”; 3000 psig in 2”
Cast steel body; variety of snap acting and throttling trim sets and internal materials
Excellent high pressure ‘dump valve’ for oil & gas separators, gas scrubbers and other liquid accumulators
|
D175 Series: Two Way, High Pressure, No Freeze Valves
|
8900 Series: Two Way, Overbalanced Valves
|
Economical snap acting no freeze valves
Working Pressure – 2160 psig
1” MNPT Inlet & 3/4” FNPT Outlet
Steel or 316 Stainless steel body, 440C Stainless steel standard trim
Excellent for oil & gas separators, gas scrubbers and other liquid accumulators
|
Used for bubble tight shut-off on high differential pressures
Working Pressure – 1500 psig in 1” and 2”
Cast steel or 2” Stainless steel body; variety of trim and internal materials
Excellent for shutting in oil & gas wells; replaces double ported valves
|
8500 Series: Three Way, Two Position, High Pressure Valves
|
400 Series: Two Way, No-Freeze Valve and Angle Valves
|
High pressure valve for diverting, blending and metering
Working Pressure – 6000 psig in 1”; 3000 psig in 2”
Cast steel or 2” Stainless steel body; variety of trim and internal materials
Excellent for well test manifolds, metering skids and other diverting operations
|
On-off or throttling controls in high pressure applications
Working Pressure – 4000 psig in 1” FNPT inlet & outlet; 4000 psig in 2” MNPT vessel &1” FNPT outlet; 1500 psig 1” MNPT inlet & 1” FNPT outlet
Steel or Stainless steel body; variety of trim and internal materials
Used for oil & gas separators, gas scrubbers and other liquid accumulators
|
8950 Series: Back Pressure or Pressure Reducing, Overbalanced Valves
|
8150 Series: Back Pressure or Pressure Reducing, High Pressure Valves
|
Maintains a constant pressure upstream or downstream
Working Pressure – 1500 psig in 1” and 2”
Cast steel or 2” Stainless steel body; variety of trim and internal materials
Excellent to maintain pressure on separators & other vessels and for pressure reducing on gas lift operations and protecting downstream equipment
|
Maintains a constant pressure upstream or downstream
Working Pressure – 6000 psig in 1”; 3000 psig in 2”
Cast steel body; variety of trim and internal materials
Excellent to maintain pressure on separators & other vessels and for pressure reducing to protect downstream equipment
|
410 Series: Three Way, Two Position, High Pressure, Balanced Valves
|
R2800 Series: Pressure Pilots
|
High pressure valve for diverting, blending and metering
Working Pressure – 1500 psig to 3000 psig in 2”
Cast steel or stainless steel body; variety of trim and internal materials
Excellent where large differential pressures are involved
|
Non-bleed reverse acting pilots
Signal pressure – 25 psig to 350 psig
Supply pressure – 5 psig to 50 psig, air or gas
Cast iron and aluminum materials; some components available in stainless steel
Used to throttle control valves for constant field adjustable pressure setting
|
884 & 992 Series: Valve Position Indicators
|
22262 Cuttler Road • New Caney, TX 77357
Phone (281) 354-3699 • Fax: (281) 354-4475
|
Use to actuate a switch when a valve opens or closes
885 uses two SPDT micro switches; cast iron body
992 uses two SPST reed switches; stainless steel body
|
Pathway Control Valves
|
